ACT ACTPRO 4000 - Timed Anti-passback

ACTpro 4000 Operating Instructions 1.00
__________________________________________________________________________
Option Description
2 Activate O/P 2
The general-purpose output OP2 is activated for its programmed
duration when users in this group are granted access.
3 Activate O/P 3
The general-purpose output OP3 is activated for its programmed
duration when users in this group are granted access.
T Toggle Relay
When the user is granted access, the relay is toggled so the door
will remain permanently open until the next time the card or token
is read. The door must be set for Toggle Relay operation.
B Track Bypass
If tracking bypass is enabled, then users in this group are always
allowed access through anti-passback doors.
Note: The options assigned to an individual user operate in addition to those
assigned to the group.
Assign PINs
The Assign PINs function allows a different PIN to be assigned to each group of users.
Initially, the PIN will be unset. Pressing the  key will prompt for the PIN for the displayed
group to be entered (it will not be displayed). The PIN must then be re-entered for verification.
The PIN will be accepted as long as it does not conflict with any existing PIN (or duress PIN).
The actual PIN is never
shown on the display. If set, a PIN directly assigned to a user will
take priority over this PIN.
Timed Anti-passback
The anti-passback feature is designed to stop users giving their cards to other users seeking
to gain access to an area. It does this by requiring users to exit an area before re-entry will be
granted.
When a user is granted access through a timed anti-passback door, then the user will not be
granted access again, until (1) the anti-passback time period expires or (2) the user exits.
The Timed Anti-passback period is set on a user group basis. Each group may have its own
timed anti-passback period.
Pressing the  key allows the anti-passback time for the displayed group to be changed.
The anti-passback period can be set from 0 days, 0 hours and 0 minutes D=00 H=00 M=00
up to 6 days, 23 hours and 59 minutes D=06 H=23 M=59. The anti-passback period has
resolution of one minute.
An anti-passback time of 0 days, 0 hours 0 minutes effectively disabled Timed Anti-
passback. Timed Anti-passback only functions on doors which are configured as
timed anti-passback doors. See installer menu.
__________________________________________________________________________________
9