ACT ACTPRO 4000 - Fire Doors; Alarms; Timers; Reporting

ACTpro 4000 Operating Instructions 1.00
__________________________________________________________________________
Exit Always
Time zones don’t apply to exit readers.
Interlock
Only one door may be open at any time.
Silent
Confirmation tones disabled.
Exit PIR
Door stays open while Push Button
closed.
Failsafe
Door relay is normally energised.
Toggle Relay
Door has toggle operation.
Exit PINs
PIN required to exit.
Monitor Arm.
AUX input monitors Intruder panel
status.
Breakglass
AUX input monitors breakglass.
Access Only
Door Relay activates on access only.
Alarms Door Forced
Aux relay activated if door forced.
Door Ajar
Aux relay activated if door left ajar.
Duress Alarm
Aux relay activated by duress code.
Door Open
Aux relay active while door open.
Acc. Granted
Aux relay fires access granted.
Exit Granted
Aux relay fires Exit granted.
Acc. Denied
Aux relay fires when access denied.
Exit Denied
Aux relay fires when Exit denied.
Relay Follow
Aux relay active if main Relay is active.
Arm Intruder
Aux relay activates to arm Intruder panel
Breakglass
Aux relay activates on Break glass
detected.
*
Installer will first be required to select a door.
Door Settings* Timers Relay Time
Time for which relay is active.
(contd.) Extended
Relay Time
Time period when relay is active for
an extended time.
OP2 Time
Time for which OP2 is active.
OP3 Time
Time for which OP3 is active.
Ajar Time
Max time which door can be open.
AUX Time
Time for which AUX output is active.
Reporting Door Ajar
Door left ajar events report in log.
Door Forced
Door Forced events report in log.
Door Open
Door Open events report in log.
Door Closed
Door Closed events report in log.
__________________________________________________________________________________
17