ACT ACTPRO 4000 - Timed Actions; Communications; Set Address; Set Encryption

ACTpro 4000 Operating Instructions 1.00
__________________________________________________________________________
Push Button
Push Button events report in log.
Read Error
Log and report reader errors.
Mains Fault
Log and Report an electric Mains
Fault.
Dis. Tamper
Disable door Tamper reports.
Dis. Contact
Disable door Contact reports.
Timed Actions Unlock Door
Specify times when door is unlocked.
Lock Door
Specify times when door is locked.
PIN Required
Specify times when PIN is required.
Any Card Specify times when any card gains
access.
Activate OP2
Specify times when OP2 is active.
Activate OP3
Specify times when OP3 is active.
Activate AUX
Specify times when AUX is active.
PIN Only
Specify times for PIN Only operation.
PIN or Card
Specify times for PIN or Card
operation.
Twin Users
Two different cards required for
access.
Normalise
Specify times when door is
normalized.
Assign Name
Assign a name to a door.
Communications Set Address
Set the network address of this door.
Comms Speed
Select communications speed.
No Hist. Log
Disables the reporting of offline log events in slave
mode.
Print All
Enables real-time logging on attached serial printer.
Remote Doors
Enable/Disable remote doors connected via DS100
modules.
IO Modules
Enable/Disable Input/Output modules.
Set Password
Set a password for remote communications.
TCP/IP Settings IP Address
Sets the IP address of the Controller.
TCP Port Num
Sets the TCP port number for comms. with ACTWin
pro.
TCP Port Num2
Sets a second TCP port number for communications
__________________________________________________________________________________
18