ACT ACTPRO 4000 - Operator Menu; User Setup; Group Setup; System Log

ACTpro 4000 Operating Instructions 1.00
__________________________________________________________________________
Operator Menu
User Setup Enable
Allow a user or range of users to open the door.
Disable
Prevent a user or range of users from opening the door.
Assign Names
Enter a name for each user.
Assign Groups
Assign users to groups.
Assign Options
Specify options for each user.
Assign PIN’s
Set the individual PIN for each user.
Learn Cards
Learn randomly coded cards (e.g. Bank Cards).
Batch Cards
Assign a batch of cards to a range of users.
One-To-One
Assign a card to a user.
Card Validity
Set a validity period for a user.
Group Setup Enable
Allow users in specified groups to open the door.
Disable
Prevent users in specified groups from opening the door.
Assign Names
Enter a name for each group.
Access Rights
Specify what access rights apply to each group.
Assign Options
Specify output and PIN options for each group.
Assign PIN’s
Set the PIN for each Group.
Timed Anti-
passback
Sets the Period for Timed Anti-passback operation for each
group.
System Log Display Log
Show the system log on the display.
Print Log
Print the system log on an attached serial printer.
Filter Log
Prevent events entering the system log.
Control Door Lock Door
Lock door - prevent all cards from opening it.
Unlock Door
Unlock door - relay is activated so cards are not required.
Normalise Door
Set a door back to normal operation.
Pass Door
Momentarily open a door for the programmed time.
AUX output on
Switches the auxiliary output on.
AUX output off
Switches the auxiliary output off.
User Tracking Log in
Log a user into the tracking area.
Log out
Log a user out of the tracking area.
Clear All
Remove all users from the tracking area.
Set Date/Time Date/Time
Set the current date and time for the system.
__________________________________________________________________________________
3