299
XX
Troubleshooting
X
Map, Voice, Entering Destinations
Troubleshooting
I cannot select an option using the Interface Dial. To reduce potential driver distraction, certain onscreen functions and features are
limited or inoperable while the vehicle is moving. Use voice commands or pull over to
proceed.
The navigation system pronunciation of street names
in the guidance command or destination address
sounds strange.
The basic guidance phrases use a studio-recorded voice, but street names are
pronounced using a machine-generated voice. Consequently, the name may be
mispronounced or sound strange at times.
The screen is bright when I drive at night. 1. Check that the nighttime dashboard brightness control is not set to maximum.
2. Press the SETTINGS button. Select Navi Settings > Map > Color (Night).
2 Switching Display Mode Manually P. 76
The screen is dark when I drive during the day. Press the SETTINGS button. Select Navi Settings > Map > Color (Day).
2 Switching Display Mode Manually P. 76
How do I change or remove my PIN? 1. Press the SETTINGS button. Select Navi Settings > Personal Info > PIN Number
> Address Book PIN or Go Home PIN.
2. Enter your existing PIN. You then have the choice to change or remove the PIN.
2 PIN Numbers P. 49
I have forgotten my PIN. How do I reset the PIN for
Home or the PIN for personal addresses?
A dealer must reset the PIN for you.
Why is Call grayed out on the Calculate Route screen? Your phone is not paired to Bluetooth
®
HandsFreeLink
®
or, if paired, your phone is in
use.
2 Bluetooth
®
HandsFreeLink
®
P. 212
Problem Solution
MDX_KA-31TZ58210.book 299 ページ ２０１５年８月３１日 月曜日 午後１時４８分
To Next Page
Loading...
Need help?
General
