Acura MDX 2014 - Switching Display Mode Manually

74
 Map  Color
System Setup
Set the screen brightness separately for Day and Night modes. Press the a
(Display mode) button to cycle through the display modes (Day to Night to Off).
1. Press the a button.
 The Brightness bar is displayed
for a few seconds.
 Rotate i to adjust the
brightness. Press u.
2. Press the a button again.
 Repeat the procedure to switch
the display modes.
■ Switching Display Mode Manually
1 Switching Display Mode Manually
A visual guide helps you see the difference
between Day and Night modes.
2 Day or Night Mode P. 10
Recommended Settings
• Select mid-range for the dash illumination.
• Select White for the map Day display and
Black for the map Night display.