Set the Date
1. Press the “▲“ or “▼“ buttons until “SET DATE?” is displayed on the Selectable
Category part of the display.
2. Press the “ ” button to set the date.
3. Press the “▲“ or “▼“ buttons to adjust the month.
4. Press the “ ” button to confirm month selection.
5. Press the “▲“ or “▼“ buttons to adjust the day.
6. Press the “ ” button to confirm day selection.
7. Press the “▲“ or “▼“ buttons to adjust the year.
8. Press the “ ” button to confirm year selection.
The date is now set.
Select Measurement Units
To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):
1. Press the “▲“ or “▼“ buttons until “SET UNITS?”is displayed on the Selectable
Category part of the display.
2. Press the “ ” button to set the unit preference.
3. Press the “▲“ or “▼“ buttons to select “STAND” for standard or “METRIC” for metric
units.
4. Press the “ ” button to confirm your selection.
5. Next, you will see “WIND MPH”. Press the “▲“ or “▼“ buttons to select MPH, KPH, or
KNOTS for wind speed units.
6. Press the “ ” button to confirm your selection. Units are now set.
Set Language
To select between English (default) or French for the display language:
1. Press the “▲“ or “▼“ buttons until “SET LANG?” is displayed on the Selectable Category part of the display.
2. Press the “ ” button to set the language preference.
3. Press the “▲“ or “▼“ buttons to select the desired language.
4. Press the “ ” button to confirm your selection.
Language is now set.
Note: Display reverts to the English language when display runs out of power or is reset.
Placement for Maximum Accuracy
To Next Page
Loading...
