90
Pairing is needed only the first time. Pairing must be performed again only if you
change devices (2WIN or VisionFit SC).
To transfer a 2WIN/2WIN-S measurement to VisionFit SC follow the steps below:
1. Perform a test using 2WIN/2WIN-S and save it. Short press the down arrow button in
2WIN (or in 2WIN tablet application). 2WIN/2WIN-S data will appear instantly on the
right side in VisionFit SC application (Reference data area). If the 2WIN/2WIN-S test
has already been performed, browse the 2WIN/2WIN-S “Browsing Mode” and long
press the down arrow button. Data will appear in the Reference area in VisionFit SC
Application.
2. Press TO MAIN button on VisionFit SC application to add data to the Subjective
Area.
Not available measurement from 2WIN can’t be transferred on VisionFit SC.
Blue sphere on the right side of WiFi symbol indicates the connection with the
VisionFit SC.
To Next Page
Loading...
