110
14 Remote control KALEIDOS App
When using 2WIN-S in KALEIDOS Bluetooth or KALEIDOS Plus configuration, it is needed
to use the remote control KALEIDOS App running on an Android tablet.
KALEIDOS App provides Bluetooth connectivity between KALEIDOS and tablet.
The tablet shall satisfy the following requirements:
• Android version 8.0 or later
• Bluetooth version 4.0 Low Energy or later
• Display size 10 inches or more
• Processor type: ARMv7
Recommended tablet models are:
• Samsung Galaxy TAB A SM-T580
• Huawei MediaPad T5
• Lenovo TB-X605L
You can download 2WIN WiFi tablet Application on your device from Adaptica’s website in
the section Products > Kaleidos > Downloads > KALEIDOS App BT.
WARNING! Tablet’s operating system updates are not recommended, since they
could compromise KALEIDOS App functioning.
14.1 KALEIDOS App installation and configuration
In order to use the KALEIDOS App for 2WIN-S remote control, the device and the Applica-
tion must be paired for the first time.
WARNING: KALEIDOS App is compatible with 2WIN-S having software ver-
sion 5.4.2 or higher and hardware version 29.1 or higher.
WARNING: In order to use KALEIDOS App a screen lock mechanism must be
enabled on the tablet. If such mechanism is not active the App won’t start.
Please follow these configuration instructions to pair 2WIN-S and the tablet Application:
1. Install the KALEIDOS App on your device
2. Check that Bluetooth is enabled on the tablet
3. Switch the 2WIN-S on
4. Run KALEIDOS App
To Next Page
Loading...