ADC PHASE 6 OPL - Page 36

33
Continued
COOL
80 F
TEMP
0
8
0
Continued
080 F
0
5
Display reads "COOL" for 1 second.
Display reads "TEMP" for 1 second.
Press "ENTER/START" if no
change.
If a change is necessary, enter
temperature change (70º to
100ºF in increments of 1ºF).
I.e., for 80ºF, press Key "0",
Key "8", Key "0", and then
press "ENTER/START"
Key.
Slope Factor:
If no change press "ENTER/
START" Key. If a change
is necessary enter Factor "A"
change (1 to 9 increments of 1).
I.e., for Factor 5 press Key "0",
Key "5" and then press
"ENTER/START" Key.
A 05
I
I
I
I