ADC PHASE 6 OPL - Page 39

36
ANTI WRINKL
GUARd ACTIVE
NoANTI WRINKL
GUARd
0 0
NoANTI WRINKL
GUARd
ANTI WRINKL
GUARd ACTIVE
Continued
dRY
40 M
TIME
0
3
5
Display will read "dRY" for 1 second, "TIME" for 1 second
(drying time) and then drying time programmed. If no
change press "ENTER/START" Key. If a change is
necessary, enter time change (0 to 99 minutes in
increments of 1 minute). I.e., for 35 minutes, press Key "0",
Key "3", Key "5", and then press "ENTER/START"
Key.
dRY
TEMP
190 F
1
8
2
Continued
Display will read "dRY" for 1 second, "TEMP" for 1 second
(drying temperature) and then drying temperature
programmed. If no change press "ENTER/START"
Key. If a change is necessary, enter temperature change
(100ºF to 200ºF in increments of 1ºF). I.e., for 182ºF, press
Key "1", Key "8", Key "2", and then press "ENTER/START"
Key.
or
35 M
182 F
I
I
I
I