Input Y to save and press Enter to confirm.
Then you need to copy the set.txt to /home/pi/ so that the program could find it and load
settings. If you set a wrong setting and the car won’t work well, you can simply copy it
again to replace the old one, and the car will go back to normal.
sudo cp -f /home/Adeept_PiCar-B/server/set.txt /home/pi/set.txt
3.4. Install Python3.7 in the PC
Install Python3.7
So far there are two versions of Python: 2.X and 3.X. The graphical UI of the terminal
control is written in Python 3.7 and it supports multiple platforms. Here we'll focus on the
installation of Python 3.7 under Windows.
Download Python 3.7:
https://www.python.org/
To Next Page
Loading...
