Adept Lynx Platform User's Guide, Rev D
Page 87 of 126
Chapter 6: Operation
Networking
The Lynx core is preset and tested on a Class-C network (netmask for all ports 255.255.255.0).
The Maintenance Ethernet port is set to IP address 1.2.3.4 and the wireless IP comes set with
an AP-based (“managed”) SSID of “Wireless Network”, unsecured. Consult with your network
systems administrator before modifying these network details through the SetNetGo OS.
The User LANport is set to IP address 10.10.10.10.
Refer to the Adept Motivity
®
User's Guide.
To Next Page
Loading...
Need help?
General