Adixen ASM 142 D - At the Leak Detector Start up; During the Leak Detector Use; Selection of the Graphic Interface Use Mode

C
440
Control panel with graphic inter face
5 / 14
GB 02669
-
Edition 03
- June
08
Selection of the
graphic interface use
mode
At the leak detector star t up When we switch on the leak detector, the starting screen displays the
selected mode.
Graphic interface
software version
The operator has 6 seconds to change it with a simple press on the
key
ADVANCED
or
BASIC
.
During the leak detector use
In order to return to the starting
screen, press the following keys at the
same time:
SET POINTS
SPECTRO
+ +
or
SET POINTS MAINTENANCE
+ +
These operations are equivalent to do a complete reset : the
dynamic and memorized graphs will be erased.