Adixen ASM 142 D - Remote Control

A 700
Accessories
1
Designation
Part No
Cable of 10 m/394˝
110
881
Cable of 15 m/59 1 ˝
110
882
Cable of 20 m/787˝
802
494
Cable of 25 m/984˝
802
339
Cable of 30 m/ 1181 ˝
802
767
Cable of 35 m/ 1 377˝
802 768
Cable of 40 m/ 1 575˝
802 769
Cable of 45 m/ 1771 ˝
802
770
Cable of 50 m/ 1 969˝
802
771
GB 02447 -
Edition
04 -
June
08
Remote control
The remote control is equipped with a magnet allowing the operator
to place it on a magnetized
surface. The operator can read the helium
signal and has
access to control keys such as cycle command
autocalibration and auto-zero.
2
models are available:
• 1 standard for all leak detectors except ASM 102 S / ASM 142 S:
Remote control with 5 m/15 feet cable length:
Designation Part No
Unit: mbar.l/s - Front face in English
106
688
Unit: T orr .l/s - Front face in English
108
881
Unit: Pa.m
3
/s - Front face in English
108
880
Unit: Pa.m
3
/s - Front face in Japanese
106
690
Note: The remote control is delivered in standard with the ASM 192
series and ASM 122 D.
English serigraphy Japanese serigraphy
mbar .l/s
or T orr .l/s
or Pa.m
3
/s
Pa.m
3
/s
only
10
-1
mbar .l/s
10
-1
Pa.m
3
/s
• 1 specific for sniffing leak detectors (ASM 102 S / ASM 142 S):
Remote control with 5 m/15 feet cable length:
Designation Part No
Unit: mbar.l/s
- Front face in English 112 747
Cable for remote control (remote control not provided):
Only Cable
3 / 14