The remote control is equipped with a magnet allowing the operator
to place it on a magnetized surface. The operator can read the helium
signal and has access to control keys such as cycle command auto-
calibration and auto-zero.
Remote control
1
Note: The remote control is delivered in standard with the ASM 192
series and ASM 122 D.
Model Part No
Unit: mbar.l/s - Front face in English
106 688
Unit: Torr.l/s - Front face in English
108 881
Unit: Pa.m
3
/s - Front face in English
108 880
Unit: Pa.m
3
/s - Front face in Japanese
106 690
Remote control with 5 m/15 feet cable length:
Designation Part No
Cable of 10 m/394˝
101 881
Cable of 15 m/591˝
101 882
Cable of 20 m/797˝
802 494
Cable of 25 m/984˝
802 339
Cable of 30 m/1181˝
802 767
Cable of 35 m/1378˝
802 768
Cable of 40 m/1575˝
802 769
Cable of 45 m/1772˝
802 770
Cable of 50 m/1969˝
802 771
Cable for remote control (remote control not provided):
Cable only
mbar.l/s
or
Torr.l/s
or
Pa.m
3
/s
Pa.m
3
/s
only
English serigraphy
Japanese serigraphy