ADLINK Technology arm AMPERE COM-HPC-ALT - BIOS Default Reset

COM-HPC-ALT User’s Guide PICMG COM-HPC R1.0
Page 35 Copyright © 2023 ADLINK Technology, Inc.
5.4 BIOS Default Reset
T
o perform a hardware reset of the default BIOS settings, follow the steps below:
1. Shut down the syst
em.
2. H
old down the BIOS Setup Defaults Reset Button continuously and boot up the system. You can release the button when the BIOS prompt scree
n
a
ppears.
3. The BIOS prompt screen will display a confirmation that BIOS defaults have been reset and request that you reboot the system.