ADTRAN MX2820 - DS3 PM Near-End Parameter Descriptions; Table 5-30. DS3 PM Near-End Parameter Descriptions

Section 5, User Interface Guide - UIG-520, M13 MUX PM Statistics
61186003L1-1D 5-43
DS3 PM Near-End Parameter Descriptions
Table 5-30 provides DS3 PM near-end parameter descriptions.
Table 5-30. DS3 PM Near-End Parameter Descriptions
DS3 PM Parameter Definition Description
Line
CV-L Code Violation -
Line
This parameter indicates the number of Bipolar Viola-
tions (BPVs) and Excessive Zeros (EXZs) that have
occurred.
ES-L Errored Second -
Line
This parameter indicates the number of seconds in
which one or more Coding Violations (CVs) or one or
more Loss-of-Signal (LOS) defects occurred.
SES-L Severely Errored
Second - Line
This parameter indicates the number of seconds with 45
or more BPVs and EXZs, or one or more LOS defects.
LOSS-L Loss of Signal Sec-
ond - Line
This parameter indicates the number of seconds for
which one or more LOS defects occurred.
Path
CVP-P Code Violation, P-
Bit Parity - Path
This parameter indicates the number of P-Bit parity
errors that have occurred. This count is not incremented
when UAS are counted.
ESP-P Errored Second, P-
Bit Parity- Path
This parameter indicates the number of seconds with
one or more P-Bit parity errors, one or more SEF defects,
or one or more Alarm Indication Signal (AIS) defects.
This count is not incremented when Unavailable Sec
-
onds (UAS) are counted.
SESP-P Severely Errored
Second, P-Bit Par
-
ity - Path
This parameter indicates the number of seconds with 45
or more P-Bit parity errors, one or more SEF defects, or
one or more AIS defects. This count is not incremented
when UAS are counted.
UASP-P Unavailable Sec-
ond,
P-Bit Parity - Path
This parameter indicates the number of seconds that the
DS3 path is unavailable. UASP-P accumulates at the
onset of 10 contiguous SESP-Ps and stop accumulating
at the onset of 10 contiguous seconds without SESP-Ps.
CVCP-P Code Violation, CP-
Bit Parity - Path
This parameter indicates the number of CP-Bit parity
errors that have occurred. This count is not incremented
when UAS are counted.
ESCP-P Errored Second,
CP-Bit Parity - Path
This parameter indicates the number of seconds with
one or more CP-Bit parity errors, one or more SEF
defects, or one or more AIS defects. This count is not
incremented when UAS are counted.