Section 7, User Interface Guide - DLP-735, Set Terminal Automatic Logoff
61186003L1-1D 7-139
7. From the Terminal Auto-Logoff menu, select AUTO-LOGOFF.
8. From the Terminal Auto-Logoff menu, input a 2 to enable the Auto-Logoff feature, and
press
ENTER.
NOTE
Input a 1 to disable the Auto-Logoff feature.
9. From the Terminal Auto-Logoff menu, select AUTO-LOGOFF TIME.
10. Input a value from 1 to 60, and press
ENTER.
This value sets the terminal automatic log-off time in minutes for any terminal connected
to the MX2820 system that is not being used within the time set.
11. Press ESC as required to return to the MX2820 Main Menu.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
To Next Page
Loading...
