ADTRAN MX2820 - Figure 7-51. Access Module Menus Screen; Procedure

MX2820 System Manual
7-146 61186003L1-1D
PROCEDURE
1. If not already connected, connect the VT100 terminal or PC to the craft port. For details,
refer to
DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
ACCESS MODULE, and press ENTER.
Figure 7-51 shows the Access Module Menus screen for a 19-inch shelf.
Figure 7-51. Access Module Menus Screen
Shelf: 1 ADTRAN MX2820 System 05/04/04 09:29
Unacknowledged Alarms: None TID: HTVLALEXD16
Access Module Menus
1 A - ............ [None] B - ............ [None]
2 A - ............ [None] B - ............ [None]
3 A - ............ [None] B - ............ [None]
4 A - MX2820 M13.. [Critical] B - MX2820 M13.. [None]
5 A - ............ [None] B - ............ [None]
6 A - ............ [None] B - ............ [None]
7 A - ............ [None] B - ............ [None]
Select Mux: Inverse = Busy Modules '?' - System Help Screen