Section 7, User Interface Guide - DLP-730, Provision DS3/DS2 Network
61186003L1-1D 7-117
Figure 7-29. DS3 Equipment Identification Menu
19. Input a value from 1 to 5 to select and input data for the desired field, and press ENTER.
1 - Near End Facility ID Code
2 - Near End Location ID Code
3 - Near End Frame ID Code
4 - Near End Unit code
5 - Near End Equipment Code
20. Press ESC as required to return to the MX2820 Main Menu.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
Shelf: 1 Slot: 1A ADTRAN MX2820 System 04/26/04 16:31
Unacknowledged Alarms: TID: HTVLALEXD16
Network Provisioning
DS3 Equipment Identification
1 - Near End Facility ID Code : N/A
2 - Near End Location ID Code : N/A
3 - Near End Frame ID Code : N/A
4 - Near End Unit Code : N/A
5 - Near End Equipment Code : N/A
Far End Facility ID Code : N/A
Far End Location ID Code : N/A
Far End Frame ID Code : N/A
Far End Unit Code : N/A
Far End Equipment Code : N/A
Selection: '?' - System Help Screen
To Next Page
Loading...
