ADTRAN MX2820 - Figure 5-22. T1;E1 Statistics Menu; Viewing T1;E1 PM Statistics

MX2820 System Manual
5-50 61186003L1-1D
VIEWING T1/E1 PM STATISTICS
To access the T1/E1 Statistics screen, select the options from each screen listed and then
press
ENTER:
1. Select ACCESS MODULES from the MX2820 Main Menu.
2. Select a number from 1 to 7 for a 19-inch shelf or 1 to 9 for a 23-inch shelf, from the
Access Module Menus, and press
ENTER.
3. Select
PERFORMANCE MONITORING from the Access Module Main Menu.
4. Select
T1/E1 STATISTICS from the Performance Monitoring menu.
From the T1/E1 Statistics menu screen, options are available to view PM data, set threshold
levels, and enable or disable alarms. Refer to the applicable subsection for additional infor-
mation.
Figure 5-22 shows an example of the T1/E1 Statistics menu screen.
Figure 5-22. T1/E1 Statistics Menu
Shelf: 1 Slot: 4A ADTRAN MX2820 System 04/15/04 02:44
Unacknowledged Alarms: None TID: HTVLALEXD16
T1/E1 Statistics
1 - Near End Daily
2 - Near End Quarter Hourly
3 - Near End Daily Thresholds
4 - Near End Quarter Hourly Thresholds
5 - Clear T1/E1 Statistics
Selection: '?' - System Help Screen