EasyManua.ls Logo

ADTRAN NetVanta 4300 Series - T1;E1 Mode DIP Switch

ADTRAN NetVanta 4300 Series
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NetVanta 4300/4400 Series Option Modules
61200890E2-34T Copyright © 2019 ADTRAN, Inc. 31
Clock Source
•Network
Internal
Diagnostics
Network Loopbacks: Line, payload, remote
Test Pattern Generation and Detection: QRSS, 2
15
- 1, 511, all ones, all zeros
Compliance
EMC - see Electromagnetic Compatibility (EMC) Table on page 6.
AS/ACIF S016
ETSI TBR 12/TBR 13
ACTA/FCC Part 68
IC CS-03
UL/CUL 60950-1
EN 60950-1
IEC 60950-1
AS/NZS 60950-1
RoHS Compliant (1202843E1 only) (Telecommunications exemption)
Environmental
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: 95 percent, noncondensing
Physical
No external CSU/DSU is needed with the T1/FT1 interface.
5.63-inch W x 8.63-inch D
T1/E1 Mode DIP Switch
The T1/E1 Wide Module is shipped with the T1/E1 mode switch (located on the circuit board) set to T1. If
you require E1 functionality, use your thumbnail to slide the E1 mode switch to the
ON position (as shown
in the figure below).

Table of Contents

Related product manuals