Unit Installation NetVanta 4300/4400 Series
54 Copyright © 2019 ADTRAN, Inc. 61200890E2-34T
Installing a CompactFlash Card
The CompactFlash slot supports any industry standard 1 GB CompactFlash card. Follow these instructions
when installing a card.
Slide the module into the CompactFlash slot until the card is firmly seated against the chassis.
The CompactFlash options will now
be available in the GUI and the AOS CLI.
The CompactFlash card is hot-swappable and can be inserted or removed while power is
applied to the unit.
Figure 27. CompactFlash Card Installation
Your NetVanta unit is now ready to be configured and connected to the network. For information on
configuration for a specific application, refer to the configuration guides provided on the
ADTRAN Support
Community. For details on the command line interface (CLI), refer to the AOS Command Reference Guide. All
other related documents are also available online at
http://supportforums.adtran.com.
Instructions for Installing a CompactFlash Card
Step Action
1
2
To Next Page
Loading...
Need help?
General
