ADTRAN NetVanta 4300 Series User Manual

Unit Installation NetVanta 4300/4400 Series
50 Copyright © 2019 ADTRAN, Inc. 61200890E2-34T
Using a USB Cellular Modem with the NetVanta USB WWAN NIM
The NetVanta USB WWAN NIM contains a Type A USB connector that supports a variety of third-party
USB cellular modems.
Remove power from the base unit.
Remove the cover from the base unit’s option slot.
Slide the USB WWAN NIM into the option slot un
til the module is firmly seated against the
chassis.
Secure the pins at both edges of the module.
Restore power to the base unit.
Refer to the quick start guide tha
t shipped with the NetVanta USB WWAN NIM for instructions
on obtaining a cellular account and activating your USB cellular modem.
An optional USB Locking Mechanism is available from ADTRAN (P/N 1700643G1) to
lock the USB to the NetVanta USB WWAN NIM.
Visit the NetVanta USB WWAN NIM product page at www.adtran.com for a list of
supported third-party USB cellular modems.
• Always remove power from the unit prior to removing or installing a module.
• Improper installation may result in damage to the modules.
Instructions for Installing a USB Cellular Modem in the USB WWAN NIM
Step Action
1
2
3
4
5
6

ADTRAN NetVanta 4300 Series Specifications

General

Brand	ADTRAN
Model	NetVanta 4300 Series
Category	Network Router
Language	English