ADTRAN QDFR Unit - Clear PM and Alarm Histories Option; Figure 29. Clear PM and Alarm Histories Prompt

Menu Descriptions
61181307L7-5E 23
Clear PM and Alarm Histories Option
Selecting the Clear PM and Alarm Histories option from the QDF Main menu, displays the
following prompt shown in Figure 29.
Figure 29. Clear PM and Alarm Histories Prompt
Press
Y to clear historical data. The following line appears, to indicate that the PM and alarm
histories are being erased:
Clearing all Performance and Alarm History.
Shelf: 1 Slot: 11 Total Access System mm/dd/yy hh:mm
Unacknowledged Alarms:
Adtran QDF Main Menu
1. QDF Unit Information
2. Provisioning
3. Status
4. Auto In Service
5. Loopbacks and Test
6. Performance History
7. Scratch Pad, Ckt ID
8. Alarm History
9. Event History
10. Troubleshooting
11. Clear PM and Alarm Histories
12. System PM/Screen Report
13. Flash Upgrade
14. Virtual Terminal Control
This will clear the PM data, Alarm History, and
Troubleshooting Histories for the QDFC and the QDFR.
Are you sure (Y/N)?
Selection: 11