Quad Fiber Remote (QDFR) Unit Installation and Maintenance Practice
26 61181307L7-5E
Virtual Terminal Control
The Virtual Control screen allows control of remote unit provisioning from a QDR module.
Select the Log into QDFR option from this screen and press
ENTER to begin a user-initiated
session with a the far-end unit. When the remote session is complete, press
CTRL+X to
terminate the session.
Figure 33. Virtual Terminal Control Screen
mm/dd/yy hh:mm
Press ESC to return to previous menu
Virtual Terminal Session: Inactive
Virtual Host: no
Virtual Terminal Control
1. Log into QDFC
Selection:
To Next Page
Loading...
