Advanced Control C220 Series - Page 93

Parameter Description
C220/C420G General Flux Vector Control Inverter User Manual
92
setup
value
function description
terminal.
When the frequency source selection (F0-10) is set
to
3, it performs switching between main frequency
source X and (main frequency X plus auxiliary
frequency source Y) via this terminal.
When the frequency source selection (F0-10) is set
to
4, it performs switching between auxiliary
frequency
source X and (main frequency X plus auxiliary
frequency source Y) via this terminal.
19
UP and DOWN
setup clear
(terminal and
keyboard)
When the frequency reference is digital frequency
reference, this terminal can be used to clear the
frequency value modified by UP/DOWN and thus
restore the reference frequency to the setup value of
F0-11.
20
Running
command
switching
terminal
When the command source (F0-04) is set to 1, it
performs switching between terminal control and
keyboard control via this terminal.
When the command source (F0-04) is set to 2, it
performs switching between communication control
and keyboard control via this terminal.
21
Speed-up/speed-
down native
Protect the inverter from affecting by the external
signals (except stop command), and maintain the
current frequency
22
PID Pause
PID is inactive temporarily, and the inverter