Advanced Instruments 3250 User Guide

42
Advanced
™
Osmometer Model 3250 User’s Guide
Changing operating settings
Your 3250 has been individually set up at the factory for normal
operation, but SETUP may be required for changing the date and time
or other parameters for your individual needs.
Note NOTE The Supervisor/Operator keyswitch must be in the
Supervisor position to enable use of the SETUP menu. If the
SETUP key is pressed while the Supervisor/Operator keyswitch is
in the Operator position, a Supervisor Key Needed; Press Stop to
Continue message will be displayed.
Specific details for each setup menu item follow.
Setup Menu Items
0. Select Setup Item
1. Set Block Bin #
2. Set Sample Bin #
3. Dis/Enable I.D. #
4. Set Stir Amplitude
5. Set Date/Time
6. Dis/Enable Beeper
7. Set Serial Rate
8. Dis/Enable Xon/Xoff
9. Serial Number
10. Select Language
11. Product/Test
12. Data Capture
13. Assistance
14. Set "Buzz" Amplitude
15. Set "Buzz" Point
16. Select Range
17. Zero Calibration
Table 3: Setup Menu Items

Advanced Instruments 3250 Specifications

General

Brand	Advanced Instruments
Model	3250
Category	Measuring Instruments
Language	English