58
5
Troubleshooting and
Service
This chapter contains very basic information to help you solve
problems that might arise with your osmometer. Please read all
instructions very carefully, and if a solution cannot be found in
this guide, contact Advanced Instruments for Hot-Line Service.
Service and maintenance cautions
• Do not perform any service or maintenance yourself, except as
detailed in the User’s Guide.
• Unplug the power cord prior to opening or removing covers, or else
you may be exposed to electric shock, excessive temperatures, or
mechanical hazards.
• Performing service or maintenance not detailed in the User’s
Guide, with or without a Service Manual, should only be done by a
qualified service technician.
• Never restrict airflow into or out of the product. Occasionally, check
the air vents for blockage.
• Wipe the exterior of the product with a soft, damp cloth as needed.
Using cleaning products other than those specified, may discolor or
damage the finish.
• If the product requires service for any of the following reasons,
unplug the product from the electrical outlet and refer service to a
qualified service technician.
– The power cord, extension cord, power strip, or power input
module is damaged.
– Liquid has been spilled into the interior of the product.
– A foreign object has fallen into the product.
– The product has been dropped or damaged by a falling object.
To Next Page
Loading...
Need help?
General
