Advantech ADAM-6156PN User Manual

7 ADAM-6100PN Series User Manual
Chapter 2 Hardware Installation Guide
2.3.2 I/O Module Wiring
The system uses a plug-in screw terminal block for the interface between I/O mod-
ules and field devices. The following information must be considered when connect-
ing electrical devices to I/O modules.
1. The terminal block accepts wires from 0.5 mm to 2.5 mm.
2. Always use a continuous length of wire. Do not combine wires.
3. Use the shortest possible wire length.
4. Use wire trays for routing where possible.
5. Avoid running wires near high-energy wiring.
6. Avoid running input wiring in close proximity to output wiring.
7. Avoid creating sharp bends in the wires.

Advantech ADAM-6156PN Specifications

General

Brand	Advantech
Model	ADAM-6156PN
Category	I/O Systems
Language	English