ARK-3381 User Manual 48
4.7.13 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.
4.7.14 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.
4.8 PnP/PCI Configurations
4.8.1 PnP OS Installed
Select "Yes" if you are using a plug and play capable operating system.
Select No if you need the BIOS to configure non-boot device
Figure 4.7: PnP/PCI configurations screen
4.8.2 Reset Configuration Data
Default is Disable. Select Enable to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on and system configura-
tion has caused such a conflict that OS cannot boot.
To Next Page
Loading...
