ARK-3510 User Manual 38
EHCI Hand-Off
This is a workaround for the OS without EHCI hand-off support. The EHCI ownership
change should claim by EHCI driver.
USB transfer time-out
Set the time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
Set USB mass storage device Start Unit command time-out value.
Device power-up delay
Set the maximum time of the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.
2.0 Flash Disk 5.00
This is a Mass storage device emulation type.
3.3.7 SMART Settings
Figure 3.12 SMART Settings
SMART Self Test
This item allows users to enable or disable SMART Self Test.
To Next Page
Loading...
Need help?
General
