Advantech EKI-1361 - Page 12

EKI-1361/EKI-1362 User Manual 4
Bundle Externel Antenna
 Frequency Range: 2.4GHz ~ 2.5GHz
 Impedance: 50Ω Nominal
 VSWR: 1.92:1Max.
 Return Loss: 10dB Max.
 Radiation: Omni-directional
 Gain (Peak): 2dBi
 Polarization: Linear; Vertical
 Admitted Power: 1W
LAN
 Ethernet: 10/100 Mbps auto sensing
 No. of Ports: 1
 Port Connector: RJ45
 Protection: Built-in 1.5 KV magnetic isolation
Serial Interface
 Interface: RS-232/422/485, software selectable
 No. of Ports:
– EKI-1361: 1
– EKI-1362: 2
 Port Connector: DB9 male
 Baud Rate: 50 bps to 921.6 Kbps
 Parity: None, Even, Odd, Space, Mark
 Data bits: 5, 6, 7, 8
 Stop bits: 1, 1.5, 2
 Flow control: XON/XOFF, RTS/CTS, DTR/DSR
 Signals:
– RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
– RS-422: TxD+, TxD-, RxD+, RxD-, GND
– RS-485: Data+, Data-, GND
 Protection: 15 KV ESD for all signals, enhanced protection for RS-422/485 lines
Software
 Utility: Advantech Serial Device Server Configuration Utility
 Driver support: Windows 2000/XP/Vista/7, Windows Server 2003/2008, Linux
 Operation Mode:
– COM port redirection (Virtual COM)
– TCP/UDP server (polling) mode
– TCP/UDP client (event handling) mode
– Pair connection mode
 Configuration: Web interface, Windows utility, Telnet console
 Protocol: ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet, SNMP, HTTP,
DNS, SMTP, ARP, NTP
 Management: SNMP MIB-II