45 EKI-1361/EKI-1362 User Manual
Chapter 5 Web-Based Configuration
Static IP
User defined IP address, Subnet Mask, and Default Gateway.
DHCP + Auto-IP
DHCP Server assigned IP address, Subnet Mask, Default Gateway, and DNS.
BOOTP + Auto-IP
BOOTP Server assigned IP address.
DHCP + BOOTP + Auto-IP
DHCP Server assigned IP address, Subnet Mask, Default Gateway, and DNS,
or BOOTP Server assigned IP address. (If the DHCP Server does not respond)
DHCP Timeout
When EKI device doesn't get response from DHCP server within specific time-
out, the EKI device will give up the request and take next action.\
DNS Setting
In order to use DNS feature, you need to set the IP address of the DNS server
to be able to access the host with the domain name. The EKI-152X series serial
device server provides Primary DNS Server and Secondary DNS Server config-
uration items to set the IP address of the DNS server. Secondary DNS Server is
included for use when Primary DNS server is unavailable.
DHCP Advanced Setting
When you enabling DHCP protocol to get IP address, it will be waited DHCP
server to give IP within DHCP timeout. The default value is 30 seconds.
5.5 Wireless Configuration
You may configure the wireless configuration details in this page.
Note! All new configurations will take effect after rebooting. The reboot func-
tion is located on the main menu of the Web Configuration.
To Next Page
Loading...