EKI-1361/EKI-1362 User Manual 42
5.1 Overview
The EKI series serial device server provides web interface configuration. You can
configure EKI device with most popular standard browsers. can be configured
through a web interface. By using a standard web browser, you can configure EKI
device with the same procedure as with the Windows configuration utility can be
used. In the browser’s address field, enter the IP Address of your EKI-152X series
serial device server. The default IP setting is 10.0.0.1, but you should use the
IP which you have previously assigned for this device. Once the IP is entered, you
will be presented with the following windows.
5.2 Accessing the Web Page
By configuration utility
By Windows Internet Explorer
Note! Before using the web-based configuration, make sure your host PC
Ethernet network IP domain is as same as the serial device server, or it
can establish the TCP connection with the serial device server.
To Next Page
Loading...
Need help?
General
