EKI-1511X/1512X User Manual 60
mvcom
Show and setup the VCOM mode
[Usage] mvcom
[Function] Show all serial ports mode and related information
[Usage] mvcom nn|all
[Function] Set the “nn”th or all serial ports as the Virtual COM mode
[Usage] mvcom nn|all idleto XX
[Function] Set the “nn”th or all serial ports host idle timeout (S)
[Usage] mvcom nn|all respto XX framebk XX
[Function] Set the “nn”th or all serial ports response timeout and frame break
mctrl
Show and setup the Control mode
[Usage] mctrl
[Function] Show all serial ports mode and related information
[Usage] mctrl nn|all
[Function] Set the “nn”th or all serial ports as the Control mode
[Usage] mctrl nn|all idleto XX guardt XX hangchr XX
[Function] Set the “nn”th or all serial ports data idle timeout, guard time and hang
character
mdata
Show and setup the Data mode
[Usage] mdata
[Function] Show all serial ports mode and related information
[Usage] mdata nn|all
[Function] Set the “nn”th or all serial ports as the Data mode
[Usage] mdata nn|all protocol TCP|UDP
[Function] Set the “nn”th or all serial ports’ transmit protocol as TCP or UDP
[Usage] mdata nn|all idleto XX lsport XXXX atport XXXX
[Function] Set the “nn”th or all serial ports data idle timeout, listen port, and AT com-
mand port
[Usage] mdata nn|all respto XX framebk XX
[Function] Set the “nn”th or all serial ports response timeout and frame break
To Next Page
Loading...
