67 EKI-1500 Series User Manual
6.8 Syslogd
The EKI-1500 Series device server provides the functionality to allow network
devices to send event messages to a logging server, also known as a Syslog server,
by way of the Syslogd function. The Syslog protocol is supported by a wide range of
devices and can be used to log different types of events.
6.8.1 Syslogd Setting
Users can enable the syslogd function to record historical events or messages locally
or on a remote syslog server.
To access this page, click Syslogd > Syslogd Setting.
Figure 6.12 Syslogd > Syslogd Setting
The following table describes the items in the previous figure.
Ethernet1 link down Click the option to select a warning type when the Ethernet 1 port
is disconnected.
Ethernet2 link down Click the option to select a warning type when the Ethernet 2 port
is disconnected.
DCD changed
Port Click the option to select a warning type of the selected port when
a change in the DCD (Data Carrier Detect) signal indicates that the
modem connection status has changed.
DSR changed
Port Click the option to select a warning type of the selected port when
a change in the DSR (Data Set Ready) signal indicates that the
data communication equipment is powered off.
Save Click Save to save the values and update the screen.
Item Description
Item Description
Syslogd Click Enabled or Disabled to set the logging service status.
Save Click Save to save the values and update the screen.
To Next Page
Loading...
