Advantech EKI-1528-DR - Operation; Figure 6.5 Port Configuration > Operation

59 EKI-1500 Series User Manual
6.5.2 Operation
The Operation menu allows for the configuration of the mode type and related attri-
butes for port configuration.
To access this page, click Port Configuration > Operation.
Figure 6.5 Port Configuration > Operation
The following table describes the items in the previous figure.
Flow Control Click the drop-down menu to select the flow control mode: None,
XOn/XOff, RTS/CTS or DTR/DSR
Save Click Save to save the values and update the screen.
Item Description
Item Description
Mode Click the drop-down menu to select the port configuration mode:
Virtual COM Mode, USDG Data Mode, USDG Control Mode or
RFC2217 Mode.
Host Idle Timeout(s) Enter a value to define the host idle timeout period.
Response Timeout(s) Enter a value to define the response timeout period.
Frame Break(ms) Enter a value to specify the frame break time.
Pack conditions (Pack sent immediately when reach 1024 Bytes)
By size Click the option to sent pack immediately by size.
By interval Click the option to sent pack immediately by interval.