Advantech EKI-1528-DR - Figure 3.18 Reset Device; Resetting the Device

EKI-1500 Series User Manual 34
3.4.4 Resetting the Device
The Reset Device is available to allow you to reset the serial device server. The
function disconnects both the ethernet and serial connections.
The function also allows the serial device server to save new configuration settings to
flash memory. Once a new setting is changed, you can use the Save function to
accept the changes. You will need to reset the device to save the settings to flash
memory.
To reset the device:
1. Right-click a desired device to display the settings menu.
2. Select Reset Device.
Figure 3.18 Reset Device
The device resets. Once the process is complete, the serial device server displays
under the Serial Device Server listing once again.