EKI-1500 Series User Manual 50
5.2.4 Confirming Virtual COM Settings
1. On your desktop, navigate to Start > All Programs > EKI Device Configura-
tion Utility and click Advantech EKI Device Configuration Utility to open the
utility.
2. Locate Serial Ports menu in the menu pane and click on the Expand icon next
to Virtual COM Ports to view a list of the mapped ports.
3. Select a VCOM port to view its settings.
Figure 5.9 Serial Port Listing on EKI-1500 Series Device
For the next step, you will need to open the device manager on your system.
Using the Device Manager, you can both view and change the COM port set-
tings.
4. On your desktop, click on the Start button and then on Control Panel. A win-
dow displays showing all the available control panels.
5. Click on Hardware and Sound (Hardware). A list of all available hardware con-
figuration options displays.
6. Under Devices and Printers, click on the Device Manager link. A new window
displays showing a list of all the available devices on your computer.
7. Locate Ports (COM & LPT) and click on the expand icon. A list of all available
serial and parallel port devices display.
Note! The following instructions were developed in a Windows 7 environment;
the Windows XP equivalent is displayed in parentheses (). Instructions
may vary according to the operating system used.
To Next Page
Loading...
