Advantech EKI-1528-DR - Change Password; Secure Access IP; Export Device Settings; Figure 6.17 Management > Change Password

71 EKI-1500 Series User Manual
6.10.2 Change Password
The Change Password function allows you to easily update your current password
from a single menu.
To access this page, click Management > Change Password.
Figure 6.17 Management > Change Password
The following table describes the items in the previous figure.
If you have set a password through the configuration utility or Telnet or serial console,
when you access the web configuration, you need to key in the password. It is not
necessary to enter the user name in the dialog.
If you want to disable the password protection, change the password to default option
None (leave the new password column blank). Be sure to press the Save button and
reboot the serial device server to make the change effective.
6.10.3 Secure access IP
To access this page, click Management > Secure access IP.
Figure 6.18 Management > Secure access IP
The following table describes the items in the previous figure.
6.10.4 Export Device Settings
Export the server configuration settings to a .conf file.
To access this page, click Management > Export.
Click Export to export the serial device server settings.
Item Description
New password Enter the character set for the define password type.
New password again Retype the password entry to confirm the profile password.
Save Click Save to save the values and update the screen.
Item Description
Access IP number Enter a value to define access IP number
Save Click Save to save the values and update the screen.