57 EKI-1500 Series User Manual
6.4 Ethernet Configuration
Choose either Eth 1 or Eth 2 in the Ethernet Configuration page.Enter the corre-
sponding values for your network environment. Remember press Save after fill in all
values.
To access this page, click Ethernet Configuration.
Figure 6.3 Ethernet Configuration
The following table describes the items in the previous figure.
Time Server Enter the address of the SNTP server. This is a text string of up to
64 characters containing the encoded unicast IP address or host-
name of a SNTP server. Unicast SNTP requests will be sent to this
address. If this address is a DNS hostname, then that hostname
should be resolved into an IP address each time a SNTP request
is sent to it.
Save Click Save to save the values and update the screen.
Item Description
Item Description
Mode Click the drop-down menu to select the IP Address Setting mode:
Static or DHCP.
MAC Address Enter the MAC address to which packets are statically forwarded.
IP Address Enter a value to specify the IP address of the interface. The default
is 192.168.1.1.
Subnet Mask Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Default Gateway Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
DNS Click the radio button to select the DNS mode: Automatic or Spe-
cific.
To Next Page
Loading...
