EKI-1500 Series User Manual 70
6.9.2 Reboot
The configuration will take effect after clicking Save button. All configurations are
saved to flash memory after a system reboot. Press the Reboot button and the sys-
tem will give a reset response. It will take a few seconds to reconnect with the new
values.
To access this page, click Tools > Reboot.
Figure 6.15 Tools > Reboot
Click Yes to reboot the serial device server. Any configuration changes you have
made since the last time you saved will be lost.
6.10 Management
The EKI-1500 Series device server allows for easy installation and maintenance and
reliable maintenance access from anywhere. With the reliable management tools
available, you can streamline staffing and troubleshooting requirements to a central-
ized system.
6.10.1 Log File
If users enable the system event or serial event to log in file, users can download the
log file from here.
To access this page, click Management > Log File.
Figure 6.16 Management > Log File
The following table describes the items in the previous figure.
Item Description
System Log File Click the drop-down menu to select a specific action for the system
log file. Available options: Download System Log, Remove System
Log, Download and Remove System Log.
Export Click Export to download the log file.
To Next Page
Loading...
