Advantech EKI-1528-DR - Advanced; Figure 6.6 Port Configuration > Operation

EKI-1500 Series User Manual 60
6.5.3 Advanced
The Advanced menu allows for the configuration of the time delay, buffer data size
and FIFO size for port configuration.
To access this page, click Port Configuration > Advanced.
Figure 6.6 Port Configuration > Operation
The following table describes the items in the previous figure.
By end-character Click the option to sent pack immediately by end-character.
Port Data Buffering
Media Click the drop-down menu to select port data buffering type: None
or RAM.
When Data Full Click the drop-down menu to select process mode when data full:
Stop.
Save Click Save to save the values and update the screen.
Item Description
Item Description
Ignore Purge Click the option to purge the serial port when the serial port opens
first time.
Disable Character Time-
out Detection
Click the option to disable the serial port character timeout detec-
tion.
Disable Multiple Con-
nection
Click the option to disable the multi-access function. Then only one
TCP connection is allowed on this serial port.
Enable BufferData Size Click the option to enter the value to queue data to become a
packet.
USDG Advanced Options (Flow Control will overwrite these options)
RTS Control Click the drop-down menu to select the status of RTS: ON, OFF,
Toggle By Connect or Toggle By Data.
DTR Control Click the drop-down menu to select the status of DTR: ON, OFF,
Toggle By Connect or Toggle By Data.
Save Click Save to save the values and update the screen.