29 Chapter 4
4.2 Installation of the SVGA Driver
Complete the following steps to install the SVGA driver. Follow the pro-
cedures in the flow chart that apply to the operating system that you are
using within your board.
4.2.1 Installation for Windows 95
1. Select "Start", "Settings", "Control Panel", "Display", "Settings”,
and "Advanced Properties".
Notes: 1. The windows illustrations in this chapter are
intended as examples only. Please follow the
listed steps, and pay attention to the instruc-
tions which appear on your screen.
2. For convenience, the CD-ROM drive is des-
ignated as "D" throughout this chapter.
1
To Next Page
Loading...