PCA-6781 User Manual 26
3.2.3 Advanced BIOS Features
! Blank Boot [Disabled] (* Advantech feature enhancement)
This item allows system only displays blank screen during BIOS Post stage.
! POST Beep [Enabled] (* Advantech feature enhancement)
This item allows system send out Beep sound during BIOS Post stage.
! CPU Feature
This item allows user to adjust CPU features, CPU ratio, VID and Thermal and
special feature like XD flag.
! Hard Disk Boot Priority
This item allows user to select boot sequence for system device HDD, SCSI,
RAID.
! Virus Warning [Disabled]
This item allows user to choose the VIRUS Warning feature for IDE Hard Disk
boot sector protection.
! CPU L3 Cache [Enabled]
This item allows user to enable CPU L3 cache.
! CPU L2 Cache ECC Checking [Enabled]
This item allows user to enable CPU L2 cache and ECC checking function.
! Quick Power On Self Test [Enabled]
This field speeds up the Power-On Self Test (POST) routine by skipping retest-
ing a second, third and forth time. Setup setting default is enabled.
! First / Second / Third / Other Boot Drive
Floppy Assign this boot device priority to Floppy.
LS120 Assign this boot device priority to LS120.
Hard Disk Assign this boot device priority to Hard Disk.
CDROM Assign this boot device priority to CDROM.
ZIP Assign this boot device priority to ZIP.
USB-FDD Assign this boot device priority to USB-FDD.
USB-ZIP Assign this boot device priority to USB-ZIP.
USB-CDROM Assign this boot device priority to USB-CDROM.
USB-HDD Assign this boot device priority to USB-HDD.
LAN Assign this boot device priority to LAN.
To Next Page
Loading...
Need help?
General
