Advantech WISE Series - Power; I;O Specifications; WISE-S614;WISE-S614 T I;O Module

17 WISE-4610(P) User Manual
Chapter 3 Hardware Specifications
3.4 Power
 Power Input Voltage: 10 ~ 50 V
DC
 Power Consumption:
– WISE-4610: 11 W @ 24 V, when the battery is charging
 Solar Panel Input Voltage: 17 ~ 50 V
DC
 Battery Capacity: 4000 mAh
 Battery Life: 6 months (with hourly data updates and daily GPS updates)
3.5 I/O Specifications
 Power Connector: 1 x M12 4-pin code-A male connector with male pins
 I/O Connector: 2 x M12 8-pin code-D female connector with female pins
3.5.1 WISE-S614/WISE-S614T I/O Module
3.5.1.1 Digital Inputs
 Channels: 4
 Logic Level (Dry Contact):
– 0: Open
– 1: Close DI COM
 Non-isolation
 Supports 200 Hz counter input (32-bit + 1-bit overflow)
 Keep/discard counter value when power OFF
 Supports 200 Hz Frequency Input
 Supports inverted DI status
Note! WISE-4610 modules can withstand operation in environments with less
than 30% humidity. However, environments with low relative humidity
are prone to causing electrostatic discharge issues. Therefore, users
should take adequate precautions and use grounding straps, anti-static
floor coverings, or similar equipment when manually handling the mod-
ules, especially in low-humidity environments.
Note! Batteries are at risk of exploding if it is incorrectly installed. Do not
attempt to replace the battery yourself. Batteries should only be
replaced by qualified service personnel.
Note! The battery life is estimated for temperatures of 25 °C. Operation in low-
temperature environments will reduce the battery life.