AEG Electrolux EMW2000 - Accessing Cover and Functional Support; Door Lock Assembly

- 17 -
HV844-N 12.01 R.B. 599 51 30 44 EN
b) Assembling
1 - Put the door lock in front of the
slides.
2 - Lock it by pushing to the right.
3 - Turn in the screw.
4 - Put the cover cap on.
Warning: Take care that the clip (A) is correctly locked and that the splash protection is in
place.
6) Cover
1 - Open the cover.
2 - Move out both fixing pins using a
screwdriver.
3 - Remove the cover.
Warning: Put the water inlet tray or a cloth on the drum that the fixing pins cannot fall into
the appliance when removing.
www.mosogepszerviz.info