- 3 -
TSE-N 01.03 A.B. 599 50 75 69 EN
Control Panel
Cycles
LED pre-wash
LED main wash
LED rinse
LED rinse+
LED spin
LED drum position
LED end
LED overdosed The overdosage will be indicated at the end of the cycle.
Start/Pause Button
Function:
- The selected program is activated by pressing the start/pause button.
- If the cycle is to be paused, press the start/pause button. This button is not effective when the suds
temperature is >40° C.
Display
Function:
- delayed start selection with the delayed start button
- cycle duration and remaining time indicated in minutes, 128 min (e.g. 2h08min)
- extension of soak time by pressing the delayed start button
- information on error codes (e.g. E10)
Delayed Start Button
Function:
- Hold the delayed start button pressed, the start time will be indicated in the display and counted
up, the start time can be selected max. from 1 - 19 h.
- The start time is counted down hour by hour.
- Change of delayed start: - press the start/pause button
- enter a new time with the delayed start button
- press again the start/pause button
/('GUXPSRVLWLRQ SURFHVV
21 GUXPSRVLWLRQHGHQGRIF\FOHULQVHKROGSDXVH
2)) GUXPQRWSRVLWLRQHG
)/$6+,1* GUXPLVSRVLWLRQHG
/('
VWDWXV
SURFHVV
21
F\FOHLVUXQQLQJOLGFORVHG
VWDUW
DXVH
)/$6+,1*
F\FOHLQSDXVHSRVLWLRQ
2))
OLGQR WFORVHG
21
GRHV QRWH[LVW
OLGUHG
)/$6+,1*
OLGVWLOORSHQDSSOLDQFHZDVVWDUWHG
2))
F\FOHUXQQLQJGRRUORFNFORVHG
21
OLGFDQEHRSHQHGLWLVSRVVLEOHWRSDXVHWKHF\FOH
OLGJUHHQ
)/$6+,1*
F\FOHZDVSDXVHG
2))
F\FOHUXQQLQJQRSRVVLELOLW\WRSDXVH
To Next Page
Loading...
